· Water-based ultra-fine organic pigment with the polymer dispersant · 2011 exterior house paint market development of three major trends · Architectural coatings inadequate supply of quality products · Coatings industry, the introduction of the 2011 top ten policies promulgated a series of industry-standard
 
  Vehicle paint
  Industrial paint
  Coiled material paints
  Woodenware paints
  Anti-corrosive paints
  UV photocuring paints
  General color paste
 
+ Address: Xizhang Tianrunyuan 8-6, Huishang District, Wuxi
+ Tel:+86-0510-81988298
  (Switchboard)
+ Fax:+86-510-83508359
+ Http://www.neoadditive.com
+ E-mail:sales@neoadditive.com

Used for industrial paint fertilizer recommendations
Type Model number Properties Characteristics Dosage
1,Dispersing agents
Titanium white powder and inorganic pigments NEO-1503

Acidic polymer

High dispersion whiteness as used for titanium white powder;

obvious viscosity deduction, excellent leveling performance and high brilliancy.

1-4%(for pigments)
NEO-1510 Middle molecular polyurethane high performance of dispersion and viscosity reduction, obvious settlement prevention and resistance of floating color and blur. 1-4%(for pigments)
Organic pigments and carbon black NEO-1201

Macro molecule polyurethane

Obvious viscosity reduction and stabilization effects for hard scattered pigments.

20-150%(for pigments)
NEO-1202

Macro molecule polyurethane

High cost performance and stability.

20-150%(for pigments)
NEO-1222 Polyurethane with special structure

Wide versatility for various systems;

excellent viscosity reduction, stabilization and color phase for carbon black.
20-150%(for pigments)
Economic type dispersing agents NEO-1604

Amphoteric wetting dispersing agents

Versatility and good pigment wetting property.

0.5-10%(for pigments)
NEO-1607

Wetting dispersing agents

exclusive use for alcohol aid systems, with high cost performance.

0.5-10%(for pigments)
NEO-1730 Exclusive dispersing agents for carbon black

Special dispersing agents used for primary carbon black, such as C311;

Excellent viscosity reduction, good carbon black color phase and high stability.
10-40%(for carbon black)
Co-grinding NEO-1665

Acid wetting agent containing silicon

notable effect for preventing floating color and blur for co-grinding, and valid as added later.

0.1-0.5%(for formula)
NEO-1666

Acid wetting agent

Good co-grinding effects for preventing floating color and blur, and high cost performance.

0.1-0.5%(for formula)
NEO-1667 Acid wetting agent containing silicon Excellent color expanding, floating color and blur preventing performances. 0.1-0.5%(for formula)
2,Leveling agents
Polyacrylic ester NEO-3054 Polyacrylic ester

Excellent long wave leveling and defoaming effects.

0.2-0.8%(for formula)
NEO-3055 Polyacrylic ester

High leveling speed and good foam breaking effects.

0.2-0.8%(for formula)
NEO-3058 Polyacrylic ester Excellent leveling and compatibility performance. 0.3-1.0%(for formula)
Fluorine modified Polyacrylic ester NEO-3166 Fluorine carbon

Excellent shrink cavity resistance, high leveling speed and favorable aluminum powder orientation.

0.1-0.5%(for formula)
NEO-3170 Fluorine modified Polyacrylic ester

Excellent long wave leveling effect and defoaming capability.

0.2-0.8%(for formula)
NEO-3172 Fluorine modified Polyacrylic ester

Excellent compatibility, leveling performance and appliance for middle and high polarities.

0.3-1.0%(for formula)
NEO-3177 Fluorine modified Polyacrylic ester Excellent wetting property of base material, leveling performance and appliance for middle and high polarities. 0.3-1.0%(for formula)
Organic silicon NEO-3006 Polyether modified organic silicon

excellent leveling performance, shrink cavity and oil fouling resistance, and applicability for plastic paint.

0.2-1.0%(for formula)
NEO-3606

Aralkyl modified organic silicon

High performances for aluminum powder and pearl powder orientation, and excellent defoaming performance.

0.05-0.2%(for formula)
NEO-3633 Polyether modified organic silicon

Excellent leveling performance, compatibility and high smoothness.

0.1-0.3%(for formula)
NEO-3645 Polyether modified organic silicon Excellent leveling performance and hand feeling. 0.1-0.3%(for formula)
3,Defoaming agents
Organic silicon NEO-5201 Modified organic silicon Balanced defoaming performance and compatibility; high safety. 0.2-0.8%(for formula)
Fluorine silicon NEO-5606 Fluorine silicon superpolymer

Favorable defoaming capability, especially bubble breaking capability.

0.1-0.5%(for formula)
NEO-5606D Fluorine silicon superpolymer Low odor type of NEO-5606D, with high defoaming capability. 0.1-0.5%(for formula)
4,Special blending agents
Acid catalyst NEO-8925

Closed dodecylbenzene sulfonic acid

High catalysis efficiency for stoving varnish systems, high compatibility and brilliancy.

0.1-1.0%(for formula)
NEO-8945 Closed para-toluenesulfonic acid High catalysis efficiency for stoving varnish systems, with the minimum unsealing temperature of 80℃. 0.1-1.0%(for formula)
Adhesive force accelerant NEO-8980 Epoxy phosphoric acid ester

High compatibility and obvious adhesive force improvement for metal base material;

Fairly good effects of acid catalysis solidification for stoving varnish systems.

0.5-2.0%(for formula)
NEO-8982 Epoxy phosphoric acid ester

High performance for improving adhesive force of metal base material;

notable improvement of abrasion resistance for baking pre-coating.
1-5%(for formula)
Previous page:Used for vehicles of paint additives is recommended
Next page:Used for the coil coatings auxiliaries recommended
    

 
 
Copyright ◎ 2011 Wuxi NEO Chemical Material Co.,Ltd All reserved.Address: Xizhang Tianrunyuan 8-6, Huishang District, Wuxi
Zip code:214000  Tel:+86-0510-81988298(Switchboard) Http://www.neoadditive.com E-mail:sales@neoadditive.com